The Penis Envy strain of Psilocybe cubensis is the most potent by far. No, it is not available as a mushroom cultivation kit. You may cultivate the most robust mushrooms yourself!

This enhanced Penis Envy culture combines the greatest qualities of the several PE sub strains. The P. Envy is distinguished by its enormous phallus-like mushrooms. This particular PE strain is very robust, thick, and amusing to cultivate!

The First and Penis Envy grow kit!

According to legends, Terence McKenna and/or Steven Pollock created these strong magic mushrooms using Amazonian strains. Obviously, there is no need to explain why they are named Penis Envy:)

Its mushroom crown has an unusual mutation in the form of a phallus. This unique appearance is produced and maintained by strain selection and making this unique mushroom culture accessible as a grow kit.

This strain is highly special and rather mysterious due to the lack of knowledge around it.

Very High Potency

Penis Envy mushrooms are much more powerful than other cubensis variants. The Envy is one of the rare strains with significantly elevated concentrations of psilocybin and psilocin. We were fortunate enough to feel their power. Mushrooms that enhance the meaning of psychonaut! In one word WOOOW!!:)

Growing Penis Envy Mushrooms

Due to the fact that the Penis Envy is a mutation of the cap, many of its mushrooms are infertile. They lack spore production. Collecting penis envy spores is difficult, and you will need to cultivate a large quantity to fill a spore vial or syringe.

Mycelium-grown Penis Envy cultures are thankfully accessible. This may be accomplished by spores, a mycelium wedge, or a cap fragment. This is the sole method for cultivating this supersayan variety.

Penis Envy magic mushroom grow kit

Penis Envy grow kits are made from this culture. They need optimal conditions to grow. Keep temperature steady on 24-25 degrees Celsius and Humidity high. Within a 2 weeks you will have your first batch of PE Mushrooms. They will not grow in abundance or with many at the same time, but with a few you get a trip that you will never forget.

How To Grow Penis Envy Mushrooms

If you’re wondering how to grow Penis Envy Mushrooms, you’ve come to the right place. Do not be discouraged by a lack of knowledge. We will explain all you need to know to cultivate these renowned fungus successfully. Continue reading to learn how to cultivate Penis Envy Mushrooms properly. We have you covered.

THE PROS AND CONS OF GROWING PENIS ENVY MUSHROOMS

Due to its potency and the weight of their fruiting bodies, Penis Envy Mushrooms are a dream for any magic mushroom cultivator. As with anything in life, there are pros and cons to growing Penis Envy Mushrooms.

Cons

• The most significant downside to Penis Envy Mushrooms is that they are one of the most difficult Psilocybe Cubensis varieties to cultivate.
• Penis Envy Mushrooms also produce extremely few spores, perhaps owing to their morphological qualities. This indicates that just a few Penis Envy Mushrooms are required to gather sufficient spores for a valid spore print or syringe.
• Because this genetic line has been purposely chosen, Penis Envy Mushrooms are less resistant to contamination. It is quite improbable that this species has survived in the wild, since it normally takes around 25 percent longer for species to invade and establish. Penis Envy Mushrooms have around half the pin rate of other species of magic mushrooms.
• In addition, they need certain circumstances throughout the incubation phase. Instances of this include the inclusion of a casing layer and a substrate with a greater moisture content.

Pros

• By taking the time to understand how to cultivate Penis Envy Mushrooms, you will maximize the yield of your substrate. Varieties of Penis Envy often break away from the substrate considerably more easily than other strains. This convenience eliminates the need to destroy the casing or substrate while extracting a huge flush.

These varieties may be grown, if poorly, on birthing cakes. You should notice that they are best suited for applications submitted in bulk. The growth parameters are identical to those of any Psilocybe Cubensis, however harvesting may be a little different. Unlike other strains, the Penis Envy Mushroom tops are not yet ready to be harvested when they lose their veil. After removing the veil from ripe mushrooms, a three- to five-day waiting time is advised.

KNOWN PENIS ENVY MUSHROOM STRAINS THAT CAN BE GROWN

Do you need to know your past in order to understand your future?. Perhaps not necessarily. Observe the Penis Envy Mushroom strain! There are a number of recognized Penis Envy Mushroom strains that may be produced today, despite the fact that their ancestry remains a mystery. (Again, while complying by the law and depending on where you reside.) Beginning in the late 1970s with Stephen Pollock, several mycologists and genetics merchants isolated and crossed the Penis Envy strain’s culture. These tests generated various distinct subvariants, including:

• Albino Penis Envy (Albino PF x Penis Envy cross)
• Penis Envy #6 (a mutation)
• Texas Penis Envy (Texas Orange Caps x Penis Envy cross)
• Penis Envy Uncut (a mutation)
• Trans Envy (Transkei x Penis Envy cross)

It’s crucial to remember that potency among all Penis Envy Mushroom strain varieties is consistently higher than all other Psilocybe Cubensis varieties. Below is a brief description of each:

ALBINO PENIS ENVY MUSHROOMS

this particular mushroom has the milky white coloration of the Albino PF variety, and its caps are sometimes tinged dark blue. Albino Penis Envy mushrooms are also smaller than Penis Envy mushrooms on average.

PENIS ENVY UNCUT MUSHROOMS

said to be the most potent of all of the Penis Envy varieties, this strain has a couple of unique characteristics. With a distinct physical feature, the Penis Envy Uncut Mushroom Strain has caps that don’t open at all, even late in the fruiting bodies maturity. Additionally, caps are distinctly darker than the regular Penis Envy strain.

​TRANS ENVY MUSHROOMS

A variant isolated by a distributor of mushroom spores dubbed “Spores Lab.” They resemble Transkei Magic Mushrooms in appearance, with thin yellow-white stems and crowns of average size. Additionally, this variant is significantly weaker than other Penis Envy varieties.

The physical traits and potency of each mutation may vary somewhat, but Penis Envy strains are typically more powerful than other P. Cubensis types.

Similar to Golden Teachers Mushrooms, Penis Envy variations need more time to develop and mature than many other strains, resulting in a greater psilocybin dosage. In fact, certain Penis Envy varieties are two to three times as potent as other strains, therefore it is important to know which strain you are cultivating.

HOW MUCH TIME IT TAKES TO GROW PENIS ENVY MUSHROOMS

As with any growth process, the key to a positive experience is to appreciate each phase without expecting a precise timeframe. However, with enough planning and knowledge, you should be able to cultivate Penis Envy Mushrooms within two months. Due to the fact that everything depends on Mother Nature, there is no exact schedule for cultivating Penis Envy Mushrooms, however the following is an approximation:

• Week 1: Spore inoculation to spore germination.
• Week 2: Spore germination or inoculation to complete colonization of the substrate or cake.
• Week 2 to 4: The start of the fruiting cycle, which can then take about two more weeks.
• Week 4 to 6: Once the substrate or cakes turn a blue color, the mushroom fruiting is complete.

From inoculation through fruiting, the whole growth cycle for psilocybin mushroom spores takes four to six weeks. Remember that the quality and production of the final mushrooms rely on how effectively you monitored and managed the area’s temperature and humidity. You should have also been vigilant about insects and other pollutants.

If you have any growing expertise and an instinctive understanding of the biological cycles of mushrooms, you will be successful. These are essential variables for mushroom growth. Obviously, expertise is not required for success. Once you grasp the fundamentals of a mushroom’s life cycle and its requirements, you may establish a schedule for cultivating Penis Envy Mushrooms.

HOW TO GROW PENIS ENVY MUSHROOMS USING THEIR SPORES

As you learn how to cultivate Penis Envy Mushrooms, you will discover that high-quality spore prints may be used for inoculation. This term refers to the powdery deposit created when Penis Envy spores land on a surface.

The challenge with Penis Envy variants and their spores is that their collecting is much more difficult. On average, less than five percent of Penis Envy Mushrooms release spores, limiting their availability. Alternatively, growers may harvest the spores by swabbing the gills of the mushrooms with a sterile Q-tip. Once spores have been gathered or purchased, the next step in learning how to cultivate Penis Envy Mushrooms is to germinate them.

PAPER RUBBING PENIS ENVY MUSHROOM SPORES:

Fold and rub Penis Envy Mushrooms spore-printed paper together. This action caused the spores to fall onto nutrient-rich agar substrate. (This approach is not optimal since dense populations of mushroom spores are often packed together, resulting in suboptimal outcomes.) As with tissue/agar cloning, the ideal method for germinating Penis Envy Mushrooms spores from a print is in a glove box on nutrified agar plates.

SCALPEL AND STREAKING PENIS ENVY MUSHROOM SPORES:

• Sterilize a scalpel by passing it through a burning flame, then cooling it in the nutrified agar. This way the scalpel gets covered with a moist and adhesive layer for better Penis Envy mushrooms spores attachment.
• Touch the spore print with the scalpel tip to collect the plentiful mushroom spores.
• Streak the tip into an “S” pattern across the surface of the petri dish.
• 5 to 15 days later, your spores (should) germinate according to the streaking pattern.
• Colonies of germinating spores can then be subcultured into more Petri dishes.

PENIS ENVY MUSHROOMS SPORES SYRINGE:

Cultivators can also use Penis Envy Mushrooms spores stored in solutions suspended in syringes and vials. These are where the spores are re-hydrated using sterile water and then used to inoculate the growing medium.

• Start out by sterilizing your water and glass beaker, cover with foil.
• Place the bottle in your pressure cooker and heat it until it reaches 15psi. Once it reaches the desired pressure, lower the temperature and maintain it for 30 minutes.
• After the 30 minutes, turn off the heat completely and allow the water to cool to room temperature. If the water is still hot, there is a huge risk of killing the spores. It’s easiest to let the water sit overnight.
• Once the water is cool (usually a few hours if not left overnight), sterilize the tweezers and scalpel in a flame.
• Remove the foil, and with your tweezers, take the spore print from its storage and hold it over the opening of the beaker.
• With the scalpel in hand, carefully scrape some of the spores into the water.
• Fill the syringes instantly by placing the tip of the syringe in the water and pulling it to fill it up. It’s best to empty the syringe back into the beaker and repeat this process a couple of times. (This ensures a good spread of spores throughout the water.)
• Now that you have a filled syringe, leave it at room temperature for 2 to 3 days to fully hydrate the Penis Envy Mushrooms spores.

The advantage of a Penis Envy Mushrooms spore syringe is a higher chance of the spores germinating by using the water to inoculate your chosen substrate.

INOCULATION IS A KEY STEP IN LEARNING HOW TO GROW PENIS ENVY MUSHROOMS

Inoculation is the next step after learning how to cultivate Penis Envy Mushrooms using gathered or bought spores. Here, you will transfer the Penis Envy spores to your selected substrate in an effort to produce mycelium that thrives. Buy Penis Envy XL Magic Mushrooms online

Penis Envy spores lack chlorophyll and hence do not need light for photosynthesis. For the nutrients necessary to germinate, they ingest decomposing organic waste such as leaves and animals. As each species of mushroom develops on distinct substrates, the best suitable material is determined by the species. Sawdust, straw, wooden plugs, and entire grains are examples of suitable substrate materials.

Although Penis Envy mushrooms may be cultivated on birthing cakes (although poorly), they are most effective when applied in bulk.

The spawn is created by combining the spores of the Penis Envy Mushrooms with the nutrients given by the suitable material; it is essential for the development of the mycelium. The mycelium is the fungus from which fruiting mushrooms develop.

When spawn is combined with a substrate, fruiting may be more robust and mushrooms can be more abundant. Penis Envy mushrooms develop and bear fruit more slowly than other members of their genus. This unique trait also enables the Penis Envy fruiting bodies to produce more psilocybin than strains that grow more quickly.

In addition, the Penis Envy variants have a tendency to be more easier to pluck off the substrate than other strains. This characteristic eliminates the need to destroy the casing or substrate while extracting a huge flush. Penis Envy Mushrooms have the same growth parameters as other P. Cubensis strains, although harvesting may be a little different.

How? Unlike other strains, the shattering of the Penis Envy Mushroom cap’s veil does not signify that they are ready to be harvested. Instead, it is advisable to wait at least 3 to 5 days after tearing the veil before harvesting.

HOW TO GROW PENIS ENVY MUSHROOMS FROM A GROW KIT

By employing a psilocybin grow kit for growth, you might effectively avoid all the previously described alternatives and stages. To cultivate Penis Envy Mushrooms, all you need is a mycelium substrate and a welcoming habitat.

The mycelium is just the fungus from which edible mushroom fruiting bodies develop. Since growing kits contain mycelium and a grow box, the procedure is simplified and made more easy. Everything is present, and growth is possible without spores. A Penis Envy Mushrooms grow kit typically consists of a substrate with live mycelium, a clear grow bag with an air filter, and two paper clips.

Utilizing a psilocybin grow kit provides advantages, since the transformation of mushroom spores into mycelium has already occurred in a sterile laboratory. Due to the kit’s frigid climate, the mycelium is in a dormant state and has not yet produced mushrooms.

However, there is still a possibility of contamination, inconsistency, and even counterfeit goods when utilizing growth kits. A recognized and renowned supplier of Penis Envy Mushrooms grow kits as well as the spores themselves (see our store for more information) is the greatest choice for harvest success. Buy Penis Envy XL Magic Mushrooms online

Regardless of the approach you select to learn how to cultivate Penis Envy Mushrooms, it is essential to appreciate the beautiful process that unfolds before your eyes! What other ways might you enjoy it?